loading
| Availability: | |
|---|---|
Introduction of NJP-1200 full automatic capsule filling machine
The machine is an intermittent motion and hole plate type filling fully automatic capsule filling equipment.
It adopt optimization design combined the characteristics of Chinese medicine and the requirement of GMP, it has the characteristics of compact mechanism, small volume, lower noise, precision filling dosage, multi-function, running stably etc.
It can finish the following motion at same time: capsule feeding, capsule separating, powder filling, capsule rejecting, capsule locking, finished capsule discharge and module cleaning etc.
This machine is designed for meet the volume-produce on the basis of model NJP-800 automatic capsule filling machine. it increase the lifting mechanism that easy to clean. It saves the cost and manpower for the enterprise that need volume-produce
Main Features：
1.It has been improved the inner design turret, and imports beeline bearings for each machine from Japan directly, so that it can be sure to get a longer usage-life and precision of machine.
2.The working station cam runs under the good lubricating condition, and maintains the inner lubrication of cam slot to a full extent, increasing the pressure pulverization oil pump, thus extends the operation life of the spare parts.
3.It is controlled by the computer, has a step less timing with the frequency-conversion, the numeral showing makes an easy operation and clear appearance.
4.The multi-bore dosing brings a precision dosage (it is controlled around ±3.5%); The capsule qualified rate is higher than 99%.It can be filled with the Chinese traditional medicine and the Western medicine.
5.It has a protector equipment for the operator and the machine. It has automatic pause equipment when it is lack of the material. It has a steady and safe working, therefore it is the best choice for the hard capsule factories.
6.Additional function of blowing and suction of mould, which ensures the clean and no dust in the holes.
Item | Automatic capsule filling machine | ||||
Model No. | NJP-200 | NJP-400 | NJP-800 | NJP-1200 | NJP-2500 |
Max Capacity (pcs/min) | 200 capsules | 400 capsules | 800 capsules | 1200 capsules | 2500 capsules |
Filling type | Powder, Pellet,micro pill,tablet | ||||
No. of Dose/holes of each mold | 2 | 3 | 6 | 9 | 18 |
Suitable for Capsule | 000#, 00#, 0#, 1#, 2#, 3#, 4#, 5# | ||||
Noise | ≤75dB(A) | ≤75dB(A) | ≤75dB(A) | ≤75dB(A) | ≤75dB(A) |
Voltage | 380V 50Hz 3P Or customized | ||||
Total Power | 3.75Kw | 3.75Kw | 5.57Kw | 5.57Kw | 6.97Kw |
Overall Weight | 600Kg | 600Kg | 900Kg | 900Kg | 1300Kg |
Gross Weight | 650Kg | 650Kg | 985Kg | 985Kg | 1400Kg |
Machine Dimension | 750*680*1700 | 750*680*1700 | 1020*860*1970 | 1020*860*1970 | 1200*1050*2100 |
Packing Dimension mm | 1600*1050*1900 | 1600mm*1050*1900 | 1420*1220*1940 | 1420*1220*1940 | 1910*1600*2000 |
Introduction of NJP-1200 full automatic capsule filling machine
The machine is an intermittent motion and hole plate type filling fully automatic capsule filling equipment.
It adopt optimization design combined the characteristics of Chinese medicine and the requirement of GMP, it has the characteristics of compact mechanism, small volume, lower noise, precision filling dosage, multi-function, running stably etc.
It can finish the following motion at same time: capsule feeding, capsule separating, powder filling, capsule rejecting, capsule locking, finished capsule discharge and module cleaning etc.
This machine is designed for meet the volume-produce on the basis of model NJP-800 automatic capsule filling machine. it increase the lifting mechanism that easy to clean. It saves the cost and manpower for the enterprise that need volume-produce
Main Features：
1.It has been improved the inner design turret, and imports beeline bearings for each machine from Japan directly, so that it can be sure to get a longer usage-life and precision of machine.
2.The working station cam runs under the good lubricating condition, and maintains the inner lubrication of cam slot to a full extent, increasing the pressure pulverization oil pump, thus extends the operation life of the spare parts.
3.It is controlled by the computer, has a step less timing with the frequency-conversion, the numeral showing makes an easy operation and clear appearance.
4.The multi-bore dosing brings a precision dosage (it is controlled around ±3.5%); The capsule qualified rate is higher than 99%.It can be filled with the Chinese traditional medicine and the Western medicine.
5.It has a protector equipment for the operator and the machine. It has automatic pause equipment when it is lack of the material. It has a steady and safe working, therefore it is the best choice for the hard capsule factories.
6.Additional function of blowing and suction of mould, which ensures the clean and no dust in the holes.
Item | Automatic capsule filling machine | ||||
Model No. | NJP-200 | NJP-400 | NJP-800 | NJP-1200 | NJP-2500 |
Max Capacity (pcs/min) | 200 capsules | 400 capsules | 800 capsules | 1200 capsules | 2500 capsules |
Filling type | Powder, Pellet,micro pill,tablet | ||||
No. of Dose/holes of each mold | 2 | 3 | 6 | 9 | 18 |
Suitable for Capsule | 000#, 00#, 0#, 1#, 2#, 3#, 4#, 5# | ||||
Noise | ≤75dB(A) | ≤75dB(A) | ≤75dB(A) | ≤75dB(A) | ≤75dB(A) |
Voltage | 380V 50Hz 3P Or customized | ||||
Total Power | 3.75Kw | 3.75Kw | 5.57Kw | 5.57Kw | 6.97Kw |
Overall Weight | 600Kg | 600Kg | 900Kg | 900Kg | 1300Kg |
Gross Weight | 650Kg | 650Kg | 985Kg | 985Kg | 1400Kg |
Machine Dimension | 750*680*1700 | 750*680*1700 | 1020*860*1970 | 1020*860*1970 | 1200*1050*2100 |
Packing Dimension mm | 1600*1050*1900 | 1600mm*1050*1900 | 1420*1220*1940 | 1420*1220*1940 | 1910*1600*2000 |
